Corporation is also a commonly used equipment for major industries. Although there are many advantages to use, there will always be some failures. In order to avoid bad things, it is recommended to maintain an appropriate amount of tin when used. When choosing a centrifugal fan, try to choose the right product, many models, and different types of products in different types of products. Therefore, it is necessary to understand this. Only such a centrifugal fan can have enough tin to avoid being exposed to the air and accelerate the welding header. Oxidation, pay attention when operating in the future. In addition, you need to know here that before the cleaning state, clean the oxide on the welding head to clean it so that the solder can be in good flow when welded, and you must usually have to have a good flow. Usually, you must also need it. Do a good job of maintenance and maintenance, so it can extend life.

At the same time, after the centrifugal fan is completed, a new tin should be added to the welding head, so that other parts of the fan will not be oxidized too fast. When cleaning the centrifugal fan, you can use a dedicated clean sponge to remove the residue and the residue of the welded dregs and Oxide, this kind of sponge is wet. What the staff needs to know here is that these things are scraped off with a blade at this time before welding. In addition, there are some common problems, that is, the surface of centrifugal fan is often applied to the surface of it often coated There is tin to increase its durability. In this way, it can increase its oxide to be cleaned in time. If you find that there are black oxides with a tin plating layer, then you need to do this problem in time. Clean up. Only in this way can the benign liquidity of thermal conduction be guaranteed. Of course, we need to choose the correct mode and choice. Improper selection will not only affect the efficiency of automation, but also greatly reduce the quality. These are some knowledge that should be clear when buying. Click, if you don't understand anything, you can consult our customer service staff when convenient.

This is here today. Thank you for watching it. Through the introduction above, we know how to improve the operation of the centrifugal fan. If you have other questions, you can ask us at any time. We have professional engineers who will give it to us. You solve your professional problems, okay, I wish you all a happy life.